PMC Motorsport
PMC Motorsport conversion hardware for ZF 8HP, DCT and manual BMW gearbox swaps. This is the PMC range listed in Australia: engine-to-gearbox adapter kits and adapter plates, flywheels, a torque converter adapter, chassis-specific shifter adapters and a plug-in TCU wiring harness.
Most PMC listings are a specific pairing — one engine family onto one gearbox family. Read the listing you are buying rather than assuming it covers your combination, then match that pairing to your own engine, gearbox and chassis before ordering.
Engine adapter kits and adapter plates
The adapter side of the range mates a listed engine onto a listed gearbox. The pairings currently listed include:
- GM LS — to Jaguar ZF 8HP 8HP70, and an adapter kit for the Jaguar diesel 8HP70.
- Toyota JZ (1JZ / 2JZ) — to BMW ZF 8HP 50 / 51 / 70 / 75, to Jaguar Land Rover 8HP on the 6-bolt pattern, and to Getrag DCT.
- Honda K20 / K24 — to BMW ZF 8HP 50 / 51 / 70 / 75, plus DCT and manual BMW gearbox plates.
- BMW M57N / M57N2 — to ZF 8HP70 / 8HP50.
- Volvo White T5 / T6 — to ZF 8HP75 / 8HP70 / 8HP50.
- Mercedes-Benz M113 — to ZF 8HP75 / 8HP70, and M104 / OM605 / OM606 to the BMW N57 8HP setup.
- Mercedes-Benz M156 AMG — to Jaguar ZF 8HP70.
- BMW M70 — to ZF 8HP and the M57N GS6-53DZ manual.
Engine adapter kits that are not PMC are listed in the engine adapter kits collection.
Flywheels and torque converter adapter
- Flywheels for Toyota JZ, Nissan SR, GM LS and Honda K20 / K24 engines, listed against BMW M50–S54 ZF5 and Getrag gearboxes.
- Torque converter adapter for BMW ZF 8HP 8HP75 / 8HP70 / 8HP50 / 8HP51, listed for the Honda K20 / K24.
Shifters and shifter adapters
PMC lists a motorsport shifter in silver or black, a Black Edition shifter in long, medium and short, and shifter adapters for BMW E30, E36, E46 and E90–E93 plus Nissan S13, S14 and S15. These are chassis-mounting parts, so confirm the adapter matches your body before ordering.
The full shifter and paddle range, including non-PMC options, is in the shifters and controls collection.
Wiring and cooling
- TCU wire harness for the Nissan Patrol Y61 8HP conversion.
- Oil cooler adapter for the ZF 8HP BMW N57 / B58 transmission with M18 port.
Controllers, harnesses and cooling hardware outside the PMC range sit in the TCU controllers and harnesses collection and the cooling and filtration collection.
What to confirm before ordering
- The exact engine code, not just the engine family.
- The exact gearbox model and generation. Quote the model from the listing you are comparing rather than assuming two 8HP variants share a bellhousing or converter interface.
- The chassis, where the part is a shifter adapter or mount.
- Whether your build keeps the factory converter, since the converter decision changes what else you need.
Not sure which pairing applies to your build? Send the engine code, gearbox model and chassis through the contact page before ordering. If you are still choosing the transmission itself, start with the ZF 8HP gearboxes collection and the 8HP swap guides.
PMC Motorsport parts FAQ
Is a PMC adapter kit the whole engine swap?
No. An adapter kit is the engine-to-gearbox interface. The controller and harness, cooling, driveline, mounts and the gearbox itself are separate decisions, and several of them are listed in this collection rather than bundled with the adapter.
How do I know which PMC kit suits my engine?
Use the engine code, not the engine family. The listings are named by the pairing they cover — for example a JZ to BMW ZF 8HP kit, or a K20 / K24 to BMW ZF 8HP kit — so find the listing that names both your engine and your gearbox, then confirm the details before ordering.
Does PMC make parts for DCT and manual gearboxes as well as 8HP?
Yes. Alongside the ZF 8HP pairings, this collection includes adapters and plates for Getrag DCT / DKG gearboxes and for BMW ZF5 and Getrag manual gearboxes. Read the individual listing, because the gearbox named on it is the one it is made for.
Do I still need a controller if I buy a PMC adapter kit?
Yes. The adapter is mechanical. The transmission still needs a controller and harness to run, which is why the TCU controllers and harnesses collection sits alongside this one.
Will a PMC shifter adapter fit my car?
The shifter adapters are listed for individual chassis — BMW E30, E36, E46 and E90–E93, and Nissan S13, S14 and S15. Match the adapter to the body you have rather than to the gearbox.
What should I send for a parts check?
Engine code, gearbox model and generation, chassis, and whether you are keeping the factory converter. Send those through the contact page and the pairing can be confirmed before you order.














